| Author |
Predator new generation shafts |
|
SmallDave
Quite a regular
Joined: 01-Apr-2006
Posts: 50
From: North East
|
Posted: 2006-11-05 16:41
Hi everyone, I am currently looking to either buy a new shaft for my cue, or buy a new cue as shaft is knackered. Does nyone have a 314 2nd generation shaft, i see they are meant to be more accurate without having to move to a z-shaft (too thin 4 me). Any feedback regarding how different they are would be much appreciated.......also any ideas what size joint a standard buffalo cue would need as I bought mine together and have not changed it. Also like to say well done to Mr Holtz for winning his match 2day!!! 
|
|
thediamond
Home away from home
Joined: 13-Mar-2006
Posts: 1520
|
Posted: 2006-11-05 16:51
Is the Pro9 shop nearly ready??????
ANyway, standard buffalo joints are 5/16-18, piloted if they are steel and flat faced if they are phenolic. Earlier Buffalo cues had 5/16-14 joints so watch out. Best thing to do is email me a picture of the joint or let me know the model number. My email address is under the contact section.
Si
|
|
SmallDave
Quite a regular
Joined: 01-Apr-2006
Posts: 50
From: North East
|
Posted: 2006-11-05 16:57
cheers Si. Its the old rainbow cue at least 5yrs old and looking at new ones, it looks like the 5/16-14 is the same!
|
|
devil
Home away from home
Joined: 13-Mar-2006
Posts: 259
From: Hamilton, Scotland
|
Posted: 2006-11-06 05:08
On 2006-11-05 16:41 , SmallDave Wrote:!!! QUOTE !!!
Also like to say well done to Mr Holtz for winning his match 2day!!!
Cheers Dave.  I hope you managed to grab the generous 2/1 odds for me on that match as I know Darren Appleton did, the bookies sure know their stuff. 
|
